Seed Belleme

Seed Belleme Contact Lenses are the most natural circle lenses from Japan. They combine the simple elegance of one-tone circle contacts with the comfort and convenience of dailies.

Product Description:

About Seed

SEED is a Japanese contact lens manufacturer founded in 1957. Seed began their contact lens research in 1951 and have been supplying contact lenses, lens care products, and spectacles in Japan for more than half a century. Seed are dedicated to providing safe and comfortable contact lenses for every individual.

Instructions on Seed Belleme contact lenses

Seed Belleme contact lenses are daily wear soft contact lenses. Daily lenses are that once a lens has been removed from the eye, it must be thrown away.

1. Keep your fingernails short and smooth to avoid scratching your eye or your Seed Belleme contacts.
2. Always wash your hands with soap and rinse carefully before handling your Seed Belleme color contact lenses. Lenses may become contaminated if you do not wash your hands properly.
3. Always handle your Seed Belleme color contacts somewhere that is well-lit. clean and sterile.
4. Your Seed Belleme colour contact lenses may become damaged depending on how you handle them.

Checking the lenses and blister pack packaging

1. Check which Seed Belleme colour contacts are for the right eye and which lenses are for the left eye.
2. Check if there is anything wrong with the Seed Belleme colored contact lenses and blister pack packaging before opening. If there is anything wrong, for example, if there is any damage or leakage, do not open and contact the point of purchase.

Removing the blister pack packaging

1. Break off the blister pack packaging of the Seed Belleme colour contacts by folding down the sides.
2. Remove the label, keeping a firm hold on the blister pack and the label. When doing this, be careful not to cut your hand on the blister pack or label. Also note that the Seed Belleme color contacts storage solution inside the blister pack may splash upon removal of the label.
3. Remove the Seed Belleme colored contacts from the blister pack packaging by sticking the Seed Belleme color contact lenses to the pad of your index finger. Alternatively, turn the blister pack packaging upside down and empty the lens together with the storage solution into the palm of your hand. Take care, because if you dig your nail into the lens or scrape the lens on the rim of the blister pack packaging on removal, the lens may be damaged.

Checking the Seed Belleme contact lenses

1. Hold the edges of the Seed Belleme contact lenses from the side and gently move up and down to remove the liquid.
2. Put the concave surface on the index finger of your dominant hand and check which is the right side and which is the wrong side of the Seed Belleme contacts. A lens has a right side and a wrong side.

Ensure that the Seed Belleme color contacts is not inside out. Place the lens on your right index finger and verify the shape.     

3. Check if there is anything wrong with the Seed Belleme colour contact lenses, for example, deformation, discolouration, foreign matter, damage, scratches and dirt, and do not wear the lens if there is anything wrong with it.

Inserting Seed Belleme contact lenses

1. Put the Seed Belleme contact lenses onto your finger, and, with the middle finger of the same hand, pull down your lower eyelid. With the index finger of your other hand, pull up your top eyelid. If you put your finger on your eyelash line, you can open your eyes wide.
2. Look in the mirror so that your cornea comes into the center of your eye. Slowly bring the Seed Belleme colour contact lenses close to your eye and put it gently in place, still looking in the mirror. If you glance upwards when doing this, the lens will not be properly centered on your cornea.
3. When you have placed the Seed Belleme colour contacts properly on the cornea, slowly remove your index finger and then remove your fingers which had been holding your eyelids, starting with the bottom lid first and then the top lid. If you remove your fingers quickly and blink your eye shut. the lens may change position or fall out.
4. Check in the mirror that the Seed Belleme colored contact lenses is on top of your cornea and, covering the opposite eye with your hand, check your sight in your right and left eyes.
5. Follow the same procedure to fit the Seed Belleme colored contacts in your other eye.

Removing the Seed Belleme contact lenses

1. Check the position of the Seed Belleme contact lenses in the mirror.
2. Looking straight in the mirror, hold the mirror upward and look at the eye reflected in the mirror.
3. With your middle finger, slowly pull your lower lid down, and with the index finger of the same hand, move the Seed Belleme contacts down from the cornea.
4. In this position, use the pads of your thumb and index finger to gently take hold of the bottom of the Seed Belleme color contact lenses.

To avoid scratching your eye, take care not to touch your eye directly with the tips of your fingers or your fingernails.

If you are unable to remove the Seed Belleme colored contact lenses, blink several times and then try again.

Safety Usage of Seed Belleme contact lenses

If you have inadvertently worn a Seed Belleme colored contacts which is damaged or otherwise faulty, or if a lens becomes damaged while you are wearing it, remove the lens immediately and consult your eye care practitioner immediately, regardless of whether you have any subjective symptoms.

Until you are used to your lenses, you may experience symptoms such as slight discomfort, slightly bloodshot eyes, unstable vision, watering eyes or itchy eyes. Symptoms vary from person to person but will gradually diminish as you become used to your lenses. However, if you experience acute symptoms or if symptoms persist, stop wearing your Seed Belleme contact lenses and promptly consult your eye care practitioner.